YXG-150-KG Induction type contact pressure gauge (with switch enlarger)

       The gauge adopts contact-less induction switch, no contact corrosion phenomena, sensibility high, respondence quickly and control precision high. It has no laggardly leap phenomena, safety and trustworthy. There are two switch enlargers in the gauge. And the gauge outputs 0.3V～24V high-low voltage signal that is used to process control, and is used to drive small power load.

Specification：
Design： Q/320211 DGH08-2002
Accuracy：1.6
Scale range：0-0.16,0-0.25,0-0.4,0-0.6,0-1.0,0-1.6,0-2.5,0-4.0,0-6.0,-0.1-0.15,-0.1-0.3,-0.1-0.5,-0.1-0.9,-0.1-1.5,0.1-2.4MPa
Ambient temperature：-10℃-55℃
Protection degree：IP54
Voltage：DC24V; Current：100mA max.
Output： high-low voltage：0.3V/24V; Current：≤30mA。

Model	Schematic diagram	Type of contact	Location of control strip varies with motion of indicating needle	Equivalent touch type contact
YXG-150-KG21		Upper limit, lower limit	1. Both control strips are located inside the induction switch 2. When indicating needle moves upstream (or downstream), control strip of upper limit contact (or lower limit contact) withdraws from the induction switch	1.Both contacts are open, output low voltage. 2. Upper limit contact (lower limit contact) closes, output high voltage.
YXG-150-KG11		Double upper limit	1. Both control strips are located inside the induction switch. 2. When indicating needle moves upstream, control strip of contact 1 & 2 successively withdraws (leaves) from the induction switch	1. Both contacts are open, output low voltage. 2. Contact 1 & 2 successively closes, output high voltage.
YXG-150-KG22		Double lower limit	1. Both control strips are located inside the induction switch. 2. When indicating needle moves downstream, control strip of contact 2 & 1 successively withdraws (leaves) from the induction switch.	1. Both contacts are open, output low voltage. 2. Contact 2 & 1 successively closes, output high voltage.
YXG-150-KG1		Single upper limit	1. Control strip is located inside the induction switch. 2. When indicating needle moves upstream, control strip of contact withdraws (leaves) from the induction switch.	1. Contact is open, output low voltage. 2. Contact is closed, output high voltage.
YXG-150-KG2		Single lower limit	1. Control strip is located inside the induction switch. 2. When indicating needle moves downstream, control strip of contact withdraws (leaves) from the induction switch.	1. Contact is open, output low voltage. 2. Contact is closed, output high voltage.
Note: In the schematic diagram:           Control strip is inside the induction switch, it indicates that the contact is under open state .           Control strip is outside the induction switch, it indicates that the contact is under closed state.

< NEXT >